Specification
Reactor 2 Elite Integrated Proportioning Systems |
|
U.S. |
Metric |
Maximum Fluid Working Pressure |
|
E-30i |
14 MPa, 140 bar |
E-XP2i |
24.1 MPa, 241 bar |
Maximum Fluid Temperature |
|
E-30i |
65°C |
E-30i with booster heater |
82°C |
E-XP2i |
82°C |
Maximum Output |
|
E-30i |
13.5 kg/min |
E-XP2i |
7.6 lpm |
Maximum Heated Hose Length |
|
Length |
94 m |
Output per Cycle, A and B |
|
E-30i |
0.1034 liter |
E-XP2i |
0.0771 liter |
Operating Ambient Temperature Range |
|
Temperature |
-7° to 49°C |
Auxiliary Power Available |
|
Voltage |
120 Vac or 240 Vac, 60 Hz |
Engine |
|
Model |
Perkins 404–22G, 2.2 L, 29 HP |
Alternator |
|
Model |
Mecc Alte 22 kW, 240 V, 1 PH, 60 Hz, pancake style |
Battery Requirements |
|
Voltage |
12 Vdc |
Minimum Cold Cranking Amps |
800 CCA |
Connection Type |
Post Style |
Recommended Battery Size |
|
BC Group Number |
34 |
Length |
260 mm |
Width |
173 mm |
Height |
200 mm |
Booster Heater Power |
|
E-30i |
None |
E-30i with booster heat |
4000 Watts |
E-XP2i |
4000 Watts |
Rotary Vane Air Compressor |
|
Hydrovane Model V04 (PURS type), continuous run |
|
Part No. |
025CK10 |
Pressure |
0.9 MPa, 9.6 bar |
Specifications |
16 cfm |
Required Features |
Thermal overload switch, Safety Relief Valve |
Motor: Baldor |
|
Part No. |
EL1410–CUS |
Specifications |
5 HP, 1735 RPM, 240 V, 1 Phase, OPSB |
Required Features |
C face, lift rings |
Refrigerated Air Dryer |
|
Hankison Model H1T20 |
|
Specifications |
115VAC, 1 Phase, 60 Hz, 22 scfm at 150 psi (1 MPa, 10.3 bar) |
Required Features |
Pilot valve unloader |
Noise, Sound Pressure measured per ISO-9614–2. |
|
Sound Pressure measured from 3.1 ft (1 m), at 1500 psi (10 MPa, 103 bar), 2 gpm (7.6 lpm) |
91.0 dBA |
Fluid Inlets |
|
Component A (ISO) and Component B (RES) |
3/4 NPT(f) with 3/4 NPSM(f) union |
Fluid Outlets |
|
Component A (ISO) |
#8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter |
Component B (RES) |
#10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter |
Fluid Circulation Ports |
|
Size |
1/4 NPSM(m), with sst braided tubing |
Maximum Pressure |
1.75 MPa, 17.5 bar |
Weight |
|
E-30i |
794 kg |
E–30i with compressor and dryer |
998 kg |
E-30i with booster heat |
816 kg |
E–30i with booster heat, compressor, and dryer |
1021 kg |
E-XP2i |
816 kg |
E–XP2i with compressor and dryer |
998 kg |
Wetted Parts |
|
Material |
Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene |