Specification
Reactor 2 Hydraulic Proportioning System |
|
Maximum Fluid Working Pressure for Bare Proportioners |
|
Models H-30, H-40, and H-50 |
13.8 MPa, 138 bar |
Minimum Fluid Working Pressure for Bare Proportioners |
|
H-30 |
4.8 MPa, 48 bar |
H-40, H-50 |
4.1 MPa, 41 bar |
Fluid: Oil Pressure Ratio |
|
Model H-40 |
1.91 : 1 |
Models H-30 and H-50 |
1.64 : 1 |
Fluid Inlets |
|
Component A (ISO) |
3/4 npt(f), 2.07 MPa, 20.7 bar maximum |
Component B (RES) |
3/4 npt(f), 2.07 MPa, 20.7 bar maximum |
Fluid Outlets |
|
Component A (ISO) |
#8 1/2 in. JIC, with #5 5/16 in. JIC adapter |
Component B (RES) |
#10 5/8 in. JIC, with #6 3/8 in. JIC adapter |
Fluid Circulation Ports |
|
1/4 npsm(m) |
1.75 MPa, 17.5 bar |
Maximum Fluid Temperature |
|
88° C |
|
Maximum Output (10 weight oil at ambient temperature) |
|
Model H-30 |
13 kg/min (60 Hz) |
Model H-50 |
24 kg/min (60 Hz) |
Model H-40 |
20 kg/min (60 Hz) |
Output Per Cycle (A and B) |
|
Model H-40 |
0.24 liter |
Models H-30 and H-50 |
0.28 liter |
Supply Voltage Tolerance |
|
200–240V nominal, 1 phase |
195–264 VAC, 50/60 Hz |
200–240V nominal, 3 phase |
195–264 VAC, 50/60 Hz |
650–415V nominal, 3 phase |
338–457 VAC, 50/60 Hz |
Amperage Requirement (phase) |
|
See the Models listing in the manual. |
|
Heater Power (A and B heaters total) |
|
See the Models listing in the manual. |
|
Hydraulic Reservoir Capacity |